Replace Horn

Discussion in 'Modifications/Customizations' started by Gregarious57, Jul 29, 2021.

  1. Gregarious57

    Gregarious57 New Member

    Mar 29, 2021
    2007 Sea Ray 520 Sean Bridge
    Cummins QSM-11
    The horn on my 07 52’ DB has died. I can hear a click sound when I press the switch on the dash but no sound. It was pretty wimpy sounding when it was working and would like to replace it with something more serious sounding. Any one ever do this and what brand/model did you use. Any help with the install would be appreciated also. Thanks!
  2. brewster16

    brewster16 Well-Known Member SILVER Sponsor

    Aug 9, 2009
    Long Beach Island, N.J.
    '07 44 Sundancer
    Twin Cummins QSC 8.3
    I just took out and then took apart my horns. If you clean them and get rid of all the crud that is caked in there they will work perfectly. Take a look at my thread on this with pictures.
  3. FootballFan

    FootballFan Well-Known Member

    Jun 20, 2012
    Marquis 59
    MTU Series 60
    Is the compressor blowing? Wondering if the clicking sound is your compressor not coming on.

    Horns have been a constant frustration with me.
  4. Jeremygavin

    Jeremygavin Well-Known Member GOLD Sponsor

    Mar 6, 2012
    Cape Cod, MA
    2011 520 Sedan Bridge
    2016 Sea Ray 19 SPX OB
    2019 Walker Bay Generation 340
    Cummins QSM11s
    Mercury 150 Fourstroke
    Honda 40hp
    If you can’t repair and do need to replace, I replaced my single trumpet with a Kalenberg Dual trumpet D-0A and it sounds like a freight train (literally). It was an easy swap from the single trumpet. Below is a link to the one I bought.
    Last edited: Aug 31, 2021
    Henry Boyd and carterchapman like this.
  5. carterchapman

    carterchapman Well-Known Member TECHNICAL Contributor SILVER Sponsor

    Mar 25, 2008
    Lake Chickamauga/Marietta, GA/Ft. Myers, FL
    2006 Sea Ray 58 DB
    MAN CRM V8-900s, Twin Disc Drives; Onan 21.5 Generator
  6. spikedaddy99

    spikedaddy99 Well-Known Member

    Jun 11, 2008
    Prentice, Wi
    2005 500 DB
    My compressor switch in the ER was turned off one spring and duplicated your scenario. Make sure that is on.
    Jeremygavin likes this.

Share This Page

Show Sidebar