Removing Table

[dmarsh70]

Hi All..

May be a remedial question - but how do you get the darn table out of the holder so you can turn the dining area to a sleeping area?

Finally got my 04 260 S/D today! was on it all day cleaning and getting it ready - but couldnt get the table out....

 

[Gunn]

Muscle! You might try turning and pulling at the same time. They can become wedged in there pretty good. Or try spraying some silicone lubricant around it, allowing it to work it's way down into what little gap there is.

Congratulations on your new 260DA!

Tom

 

[dmarsh70]

Thanks Tom. I thought it might need elbow grease, however, I didnt want to break it if there was a secret I'll work it harder tomorrow...

 

[MT Pockets]

pull....2,3,4....twist....2,3,4....pull....2,3,4....twist....2,3,4.....

 

[Moose]

Patience my man. Wobble, twist, shimmy and pull! A little WD40 goes a long way.

 

[jamesgang]

Yeah, as above but probably two folks should work on a stubborn table post. Hey, just for fun . . . . . We should have a topic or thread, "ClubSeaRay's Funniest Videos" for stuff like this. I think it could be hillarious!

 

[dmarsh70]

Well, I finally got it off! Alot of twisting and pulling though!

 

[mmcguire2002]

Rubber mallet is your friend...

 

[xyzadc27]

im so glad to be in this forum.