Relocating sonar/temp/speed next to depth sounder- interference?

[LunaSea290]

Good day all, with the boat on the hard it's time to address some issues. This is the first year with my 2006, 290 Amberjack. The previous owner had installed a Raymarine "Triducer" B774V. The problem is the installation is in the wrong location right behind one of the strakes on the starboard side. While on plane I loose bottom/depth on the fish finder screen. (Raymarime MFD es97). My plan is to move the Triducer to the location of the speed wheel that came installed from the factory (the speed wheel gives me my speedometer reading on the dash) and swap locations. The speed wheel is in the preferred location for the Triducer. My question is, the depth sounder (appears also to be factory installed) is very close to the Triducers new location, will there be any interference between the depth sounder and Triducer?
Thanks for any advice/help.

 

[Captn TJ]

I've had both installed close together on several boats - never noticed any issues.

 

[LunaSea290]

Thank you Capt. TJ. I'll give it a try.