ghuskin
New Member
- Jul 10, 2007
- 1,089
- Boat Info
- SRV225 Cuddy Cabin, 1983
- Engines
- 228 Mercruiser w/ pre-Alpha1 "R" Drive
Update!
Well, it wasn't the trim cylinders at all...
When I pulled the boat out of the water, I went to pull the drain plug and noticed that the trim cylinders were not attached at the bell housing!?!?
Nylok nuts, washers and bushings are missing. Luckily the pin was still present.
Off to 4 different marine stores to get all the required parts. What an easy fix. Sorry, no pics!
I was able to clean bottom side of junk, as well as blast off the zebra mussles off the outdrive, then clean/wax the hull from the rub rail on down!
Thank you all for your help and encouragement!!!!
Gregg
Well, it wasn't the trim cylinders at all...
When I pulled the boat out of the water, I went to pull the drain plug and noticed that the trim cylinders were not attached at the bell housing!?!?
Nylok nuts, washers and bushings are missing. Luckily the pin was still present.
Off to 4 different marine stores to get all the required parts. What an easy fix. Sorry, no pics!
I was able to clean bottom side of junk, as well as blast off the zebra mussles off the outdrive, then clean/wax the hull from the rub rail on down!
Thank you all for your help and encouragement!!!!
Gregg
