wiess
New Member
Anyone have experience with replacing the power vent bow window on a 310DA (or another similar boat with the same window)?
Power vent bow window
- Thread starter wiess
- Start date
- Nov 12, 2006
- 5,334
- Boat Info
- 1999 Sea Ray 330DA
Twin 7.4 MPI (310 propshaft HP) V-drives
- Engines
- Twin Mercury Marine marinized 7.4L L-29 V8s
Cast iron block w 4-bolt mains
You want to disassemble the windshield? Hard to know exactly what you are asking.
Uplate
New Member
- Oct 13, 2008
- 977
- Boat Info
- 1998 Sea Ray Sundancer 310
Westebeke 4KW Generator
- Engines
- Twin 5.7 Mercruiser Carbuerated.
Alpha 1 Drives
It is a separate piece of glass and in its own frame. I would try TaylorMade first. They make the windshield glass, not sure about who makes the frame though.
wiess
New Member
Yes the window in question is just the small vent window - actualy mine has no frame around it, just straight edge glass. So I am kind of wondering if an auto glass place would able to replace it. Will check TaylorMade.
Thanks.
Thanks.
RonF
New Member
- Oct 4, 2006
- 410
- Boat Info
- 310 Sundancer 1999
- Engines
- Mercruiser Mag 350 MPI, V-drives
Yikes, is your glass broken?
Let us know how you make out on this. I would like to replace the dried/brittle weatherstripping around the opening.
Let us know how you make out on this. I would like to replace the dried/brittle weatherstripping around the opening.
wiess
New Member
Well, it's kind of broken. A corner (upper right as looking from the bow) is broken off. I am a new owner of the boat, and am tempted to believe this glass isn't original. Service mgr at the marina is attempting to find options. I am hoping that a glass company would take a pattern and make one since it is flat glass. Hope to know more next week - missing glass means pretty decent water leak when it rains...
