wyrman
Well-Known Member
- Jul 12, 2012
- 1,922
- Boat Info
- 2007 310 Sundancer
- Engines
- Twin 350's, V drives
2003 Fisher 17 aluminum
90hp Honda 4 stroke
Last summer the starboard impeller fell apart. I got most pieces out, including in the oil cooler.(or is it the power steering cooler)
That engine is running at 4psi at 3900rpm, the port engine has a Harding pump and it's running 11psi.
The starboard engine isn't overheating, but it seems like it should be higher than 4psi. It's running at 156°, and the port is running at 154°.
I checked the tstat housing and it was clear.
Where else can I check for blockage, or how would I go about back flushing the motor?
That engine is running at 4psi at 3900rpm, the port engine has a Harding pump and it's running 11psi.
The starboard engine isn't overheating, but it seems like it should be higher than 4psi. It's running at 156°, and the port is running at 154°.
I checked the tstat housing and it was clear.
Where else can I check for blockage, or how would I go about back flushing the motor?