Port Engine not starting

elevy

New Member
Oct 11, 2010
95
Lake Ontario
Boat Info
2007 280 Sundancer
Engines
Twin 4.3 v6s
Just launched my 2007 208 Sundancer for the season the Starboard engin starte fine Port side will not fire tried some eather would not fire. It just cranks and cranks coil is attached. Ran fine when put in the barn for the winter.:huh:

Thank you in advance for any help or advice.

Have a Great Day,
Ed
 
Sounds like no spark if ether didn't help... Is the kill switch on run? Spark at dizzy? Have a look under the dizzy cap for corrosion?
 
Mike thank you for the reply, I have pushed a red button under the flame arrester, when pushed a small yellow piece drops down. With that down the engine will not even crank when i push the yellow piece back up it will crank again but not start. I will check under the cap and look for moisture.

Thaks again & Have A Great Day!
Ed
 
Could it be an IAC? Try starting it in nuetral while giving it a little gas. If it starts replace the IAC.
 

Forum statistics

Threads
113,350
Messages
1,430,883
Members
61,197
Latest member
Larry Hogg
Back
Top