Picture of the ACC 1 electrical panel on the engine room bulkhead

[WV 320 Dancer]

I need to get my LED underwater lights wired to my unused ACC switch on my helm. Does anyone have a picture of this connection down in the engine room?

 

[Craig]

The aft module contains Accy 2 on the starboard pad and aft accy on the port pad.
The front module contains Accy 1 on starboard pad and forward accy on port.
I would wire them to accy 2 on the aft module and save the front module for
under dash accessories. My platform lights are wired to aft accy.
The front module wires are harder to get to. I had to cut the protective boot off to trace wires. Aft was much simpler.

 

[WV 320 Dancer]

The aft module contains Accy 2 on the starboard pad and aft accy on the port pad.
The front module contains Accy 1 on starboard pad and forward accy on port.
I would wire them to accy 2 on the aft module and save the front module for
under dash accessories. My platform lights are wired to aft accy.
The front module wires are harder to get to. I had to cut the protective boot off to trace wires. Aft was much simpler.

View attachment 66633 View attachment 66634

Thank You So Much !!!!!

The aft module contains Accy 2 on the starboard pad and aft accy on the port pad.
The front module contains Accy 1 on starboard pad and forward accy on port.
I would wire them to accy 2 on the aft module and save the front module for
under dash accessories. My platform lights are wired to aft accy.
The front module wires are harder to get to. I had to cut the protective boot off to trace wires. Aft was much simpler.

View attachment 66633 View attachment 66634

Thank You So Much !!!