parting out 1985 Searay 270 Sundancer

[Deehop]

Don't know if it will work on my 1987 300WE but I need a windless motor. Thanks!

 

[bkdude]

If your fuse holders are grey, I'm in need of those. also If you have the antennae and holder in decent shape, I could use those. also the transom door if it's in good shape, I think will fit on mine as well. I'm also going to be rebuilding the hatch so any of the panel wood that is in good shape. I might be interested in if you aren't to far from Michigan that I could drive to pick it up

 

[Feelin Froggy]

I need an oil pan for a 1990 7.4l mercrusier. Stamped steel 8 Qt 2 pc rear main seal.

 

[268 Frakenboat]

If your fuse holders are grey, I'm in need of those. also If you have the antennae and holder in decent shape, I could use those. also the transom door if it's in good shape, I think will fit on mine as well. I'm also going to be rebuilding the hatch so any of the panel wood that is in good shape. I might be interested in if you aren't to far from Michigan that I could drive to pick it up

Hi, What panels are you working on? I may have some. Send me a PM of what you are looking for and I will look. Thanks!

 

[LakerMatt]

hi there, don't know if this is going to work or not, but I need to see if you have the doors on the inside of the front portion of the cabin. I measured the one door I have at 12-3/4 x 11-3/8". I am missing 1 of them. Please let me know if you have one! thanks!

 

[probie24]

not sure if this is abit late but I have an 83 270 srv and I am looking for a rub rail if its in decent condition let me know . thanks