Panel volt meter manufacturer & part number - anyone know?

[ZZ13]

One of my AC volt meters panel mounted to the electrical panel doesn't like cold weather. The needle sticks unless I warm in up (seems to work fine at 70 degrees and up). I am considering replacing it. After a bunch of searching I found its a Modutec, and might be part number 2S-AVV-150-U, but I am not sure at all of the part number. Anyone know if this is the right replacement part number?

Also, I found a similar sized Blue Sea meter that looks like it will fit in the cutout. It includes wiring for backlighting. Its part number is 661-9353. Anyone installed one of them as a replacement?

 

[ZZ13]

Guess I am on my own with this one.

 

[bahamabreisus]

I would call Sea Ray, they can tell you who made the panel.

 

[ZZ13]

I would call Sea Ray, they can tell you who made the panel.

Thanks. Clearly Modutec made it as that is stamped on the meter. Hopefully they know the part number for a replacement.

 

[fwebster]

I understand that most of the panel meters that are analog are no longer made. I also know that Flounder Pounder bought a bunch of t hem from Sea Ray in the 2008-2010 clean-up, so you might try there. So, you are probably correct......you are on your own.

 

[ZZ13]

I understand that most of the panel meters that are analog are no longer made. I also know that Flounder Pounder bought a bunch of t hem from Sea Ray in the 2008-2010 clean-up, so you might try there. So, you are probably correct......you are on your own.

Thanks Frank. I did the Flounder Pounder check. I think I might buy one of these Blue Seas meters and see what I get. The current meter works fine except in cold weather. I didn't notice a problem until we got down into the 40s and I didn't have the boat heat on. Put a blow dryer to it and the needle moved to the proper voltage in a few minutes.