H2ONUT
Well-Known Member
I have 9 push button breakers on my dash panel. The name and number on the breaker are "E.T.A. 1658" There is no indication as to what amp they are. How can I find out what the amp is for each breaker?
Panel Push Button Breaker
- Thread starter H2ONUT
- Start date
Unless you have a wiring diagram, I don't think you have much choice except to pull the power panel and look at each one. Even on my 2006 model, you can't tell unless you pull the panel. (My wiring diagram in my manual does have that information on it.)
Although your breakers may be different, here are the ratings on mine (if that will help you at all).
10 AMP...........Battery Charger and Stove
15 AMP...........Water Heater, Microwave, Air Conditioner, and Bilge Heater
20 AMP...........Refrigerator and AC outlets
Although your breakers may be different, here are the ratings on mine (if that will help you at all).
10 AMP...........Battery Charger and Stove
15 AMP...........Water Heater, Microwave, Air Conditioner, and Bilge Heater
20 AMP...........Refrigerator and AC outlets
H2ONUT
Well-Known Member
These push button breakers are on the dash. They are above the toggles for, interior lights, cockpit lights, bilge pump, wiper, nav lights, etc... maybe I should have said on the helm.
H2ONUT
Well-Known Member
Anyone??
- Oct 6, 2006
- 12,153
- Boat Info
- 1996 450DA
- Engines
- 3116 Caterpillars
The Sea Ray parts list for both 1990 and 1991 220DA's says that part you describe as a push button breaker is a fuse holder. If the fuse holders were changed to breakers by some previous owner, your guess is as good as anyone's as to what the amperage should be.
Look at the owners manual and see if there isn't a fuse list for the boat and go from there.
Look at the owners manual and see if there isn't a fuse list for the boat and go from there.
H2ONUT
Well-Known Member
I saw that in the parts book, however, all the 220DA's I have seen, all have the same push button breakers.
