Original Prop

[Geneboom]

Hello, I have a 2012 Sea Ray 240 SD with a 350 Mag. I'd like to put the original prop on but I am not sure of the number of splines and blades. Originally it came with a 15 1/2 x 17. It's in a slip and I'd like to have the new prop ready to install when I pull it out.

 

[Tommo]

Might be helpful to find the recommended prop in the Sea Ray Owner's Club resource files, then search for it on Amazon to find out if it takes an aftermarket hub assembly (or search the manufacturer's site for the type of hub it uses... e.g., Mercury Marine props explain the different types they use on their site).

For what it's worth, I just did a couple hours of prop research in the last 24 hours and never came across a spec for splines or blades... I just entered my specs into the Prop Selector Tool and it recommended the prop to buy. The Mercury ones come with the proper hub kit for my drive shaft ('98 185BR with a Alpha 1 Gen 2).

 

[Geneboom]

Might be helpful to find the recommended prop in the Sea Ray Owner's Club resource files, then search for it on Amazon to find out if it takes an aftermarket hub assembly (or search the manufacturer's site for the type of hub it uses... e.g., Mercury Marine props explain the different types they use on their site).

For what it's worth, I just did a couple hours of prop research in the last 24 hours and never came across a spec for splines or blades... I just entered my specs into the Prop Selector Tool and it recommended the prop to buy. The Mercury ones come with the proper hub kit for my drive shaft ('98 185BR with a Alpha 1 Gen 2).

Hey thanks. I went to the Prop Selector Tool and found some good suggestions.