Online vendor for risers and manifolds

Discussion in 'Gas Engines/Drives/Transmissions/Props' started by Mightychan, Jan 14, 2018.

  1. Mightychan

    Mightychan Member SILVER Sponsor

    88
    Oct 8, 2016
    Panama City FL
    2005 DA 420, AB Dink
    Cummins 6CTA
    Hi all, I am looking for a good online vendor to order risers and manifolds for my 2004 350 MPI. Thanks!
     
  2. GoFastr

    GoFastr Cool Runnings GOLD Sponsor

    134
    Jan 20, 2016
    Cayman Islands
    2003 Sea Ray 270 SunDeck MX 6.2L MPI w/Bravo III
    Tow: 2012 Ford F150 Raptor SVT
    Mercruiser MX 6.2L MPI w/Bravo III
    Mightychan likes this.
  3. GoFastr

    GoFastr Cool Runnings GOLD Sponsor

    134
    Jan 20, 2016
    Cayman Islands
    2003 Sea Ray 270 SunDeck MX 6.2L MPI w/Bravo III
    Tow: 2012 Ford F150 Raptor SVT
    Mercruiser MX 6.2L MPI w/Bravo III
  4. eweise

    eweise Member PLATINUM Sponsor

    453
    Aug 23, 2013
    Jacksonville, FL
    2005 Sea Ray 280 Sundancer
    Twin 4.3L 220 HP, Alpha 1 Drives, 5E Genny, AC
  5. cfd95

    cfd95 Member

    264
    Nov 5, 2013
    Northport Long Island
    2002 310 Sundancer
    350 Horizons
    V Drives
    I would only use mercruiser parts.
    Dont skimp out on the most important part of the motors( the cooling system.)
    They're inboards so they're probably not dry joints.
    Don't forget the spacers too they're probably 3 inch
    I did mine last season 2K for all mercruiser parts from Lighthouse Marine
    marineengineparts.com
     
  6. Irie308

    Irie308 Member SILVER Sponsor

    685
    May 28, 2013
    CT
    320 Sundancer 2005, Raymarine C120 and C80
    Highfield 9.6 RIB & Tohatsu 8hp
    Previous boat: 215 expre
    350 Mercruisers V-drives

Share This Page

Show Sidebar