Official 380 Thread

Chris-380 said:
I did

FOOT SWITCH COVER ONLY STAINLESS STEEL

MAXWELL FOOT SWITCH COVER ONLY STAINLESS STEEL
shop.hamiltonmarine.com shop.hamiltonmarine.com
Click to expand...

+1. I bought mine from Defender...

50110862858_0213204d32_h.jpg
 
tdb380Ray said:
Where did you find that spot light cover? I have been looking everywhere for one. TIA
Click to expand...

I made that sucker, and the windlass cover. One of my very first sewing projects. Any fabric store could probably whip one up for you. Or your local canvas company. Or....use it as an excuse to buy a sewing machine :)

50111434606_acb9c7ede8_h.jpg
 
Question on bottom painting frequency...last done in March 2020 using Sea Hawk Cukote. Just hauled out and not very "hairy" - quite comparable to haulout 2022 & 2021. Thoughts please.
 
Replaced the cabin carpet with nautikflor so I don’t need the runners. Anyone interested in them? If so PM me
 

Attachments

  • IMG_3742.jpeg
    6.7 MB · Views: 45
  • IMG_3730.jpeg
    6 MB · Views: 30
  • IMG_3738.jpeg
    6.7 MB · Views: 29
  • IMG_3739.jpeg
    6.8 MB · Views: 28
Fancy pants said:
Replaced the cabin carpet with nautikflor so I don’t need the runners. Anyone interested in them? If so PM me
Click to expand...
I might be interested. Do you think they would fit my 2001 380 DA?
if so, what are you asking $$?
 
Chris-380 said:
Should fit, the only issue for my boat would be it looks like the salon has a fixed table
Click to expand...
Yeah that’s the deal breaker for me. I looked today and mine is like yours. Thanks @fancypants but I’ll have to pass.
 
SCFoster said:
If I'm not mistaken a 6 gallon Kuuma will fit in there. $331 at Hodges marine. My understanding is folks with a generator don't bother with the engine hookup. Had it hooked to the yanmar in the Beneteau sailboat.

shopping
Click to expand...
Turns out this unit doesn't fit. It's approx 13" tall and the vertical distance to the bench seat crossbar is 11 3/4". This unit is a Whale F600 6 gallon unit.
Can anyone tell me which model water heater will fit under the aft Salon bench seat?
 
I have a 2000 380 Sundancer. I want to add a 15” Garmin GPSMap in the area at the center of the boat, left side of the dash. It’s where the original Raymarine was.

I’m away from my boat for a few weeks.

Has anybody installed the 15 inch Garmin GPS map in this area?

Or can somebody measure the size of this panel so I can see if I can fit it on the specifications provided to me by Garmin?

Pictures would be a big bonus if you have them.

This isn’t about whether or not Garmin is the right brand to go with. It’s all about fitting a 15 inch GPS in this area. I have a new panel. I already have the old pieces out.
IMG_9449.jpeg
 
Kris36 said:
I have a 2000 380 Sundancer. I want to add a 15” Garmin GPSMap in the area at the center of the boat, left side of the dash. It’s where the original Raymarine was.

I’m away from my boat for a few weeks.

Has anybody installed the 15 inch Garmin GPS map in this area?

Or can somebody measure the size of this panel so I can see if I can fit it on the specifications provided to me by Garmin?

Pictures would be a big bonus if you have them.

This isn’t about whether or not Garmin is the right brand to go with. It’s all about fitting a 15 inch GPS in this area. I have a new panel. I already have the old pieces out.View attachment 163157
Click to expand...
I currently have a Garmin 4210 in my boat in this exact spot. I believe the measurements (overall) are 13.4”x 8.9. This has a 10” display, it barely fits. I don’t believe there is enough room

Here is the the dash piece, contact flounder pounder and give then the cutout of the display you want, they will let you know if it will fit

fpmarine.com

SeaRay 380 410 Sundancer/Express Cruiser 400 Sedan Bridge aft Cabin Radar Panel 1999-2002 Gauge Instrument Dash Panels

Since 1999! Boat Dash Instrument Gauge and Electronics Panels. Flounder Pounder Marine Manufactures the highest quality panels for all brands. Compare our build quality, pricing, and process to anyone. Vast selection of colors and materials. Shipped Worldwide.
fpmarine.com fpmarine.com
 
Chris-380 said:
I currently have a Garmin 4210 in my boat in this exact spot. I believe the measurements (overall) are 13.4”x 8.9. This has a 10” display, it barely fits. I don’t believe there is enough room

Here is the the dash piece, contact flounder pounder and give then the cutout of the display you want, they will let you know if it will fit

fpmarine.com

SeaRay 380 410 Sundancer/Express Cruiser 400 Sedan Bridge aft Cabin Radar Panel 1999-2002 Gauge Instrument Dash Panels

Since 1999! Boat Dash Instrument Gauge and Electronics Panels. Flounder Pounder Marine Manufactures the highest quality panels for all brands. Compare our build quality, pricing, and process to anyone. Vast selection of colors and materials. Shipped Worldwide.
fpmarine.com fpmarine.com
Click to expand...
Thank you. Very helpful.
 
You must log in or register to reply here.

Forum statistics

Threads
113,220
Messages
1,428,858
Members
61,115
Latest member
Gardnersf
Back
Top