TN370
Active Member
Just curious... what did you do with the hole after removing your coffee maker? Would love to see at picture.
1995 370 Sundancer
Official 370 Sundancer thread
- Thread starter Sea Ray Mark
- Start date
Just curious... what did you do with the hole after removing your coffee maker? Would love to see at picture.
1995 370 Sundancer
HardHead
Member
- Jan 9, 2015
- 77
- Boat Info
- 1996 Sea Ray 370 Sundancer
Previous boats:270 Sea Ray, 230 Sea Ray
- Engines
- Twin 454 Mercruiser Inboards
I fabricated a panel covered with material that is an exact match to the vinyl in the enterior. I am relocating the outlet in the cabinet to just under the cabinet need the sink. Panel is complete as well as the back board to attach it to. There will be a unique emblem on the face of the panel. I will send you pics when it is completed.
JackH
New Member
The canvas behind the spoiler on my 95 370 was completely destroyed by black vultures this fall. All I had left were edges and a bunch of dangling threads. It was due for replacement anyway, so that's ok.
Talked to my canvas guy who made my camper top, and he said it would be much easier and cheaper if I had the old piece they could use as a pattern since fitting the canvas between two edges (the spoiler and the camper top) is much more challenging. I don't have the old one, and I've contacted great lakes and another vendor to see if they have the piece. Was told Sea Ray made these in house and they are not available.
So... does anyone have an old one they are willing to part with that I could give my canvas guy? Again, this is the canvas piece just behind the spoiler.
Thanks for any assistance.
Jack
Talked to my canvas guy who made my camper top, and he said it would be much easier and cheaper if I had the old piece they could use as a pattern since fitting the canvas between two edges (the spoiler and the camper top) is much more challenging. I don't have the old one, and I've contacted great lakes and another vendor to see if they have the piece. Was told Sea Ray made these in house and they are not available.
So... does anyone have an old one they are willing to part with that I could give my canvas guy? Again, this is the canvas piece just behind the spoiler.
Thanks for any assistance.
Jack
jsneal
New Member
Jack, I just replaced all of my canvas on my 95 370, and went through a company named Sugar House Canvas in Salt Lake City. They have a boat department that is very familiar with the 370s, and they were great to work with. From what I understand they might have some templates that they can use, and will make any adjustments needed if you mail it back to them.
Mine turned out great, and they never saw my boat. I just mailed the pieces to them and they mailed the replacements back.
Hope that helps.
Mine turned out great, and they never saw my boat. I just mailed the pieces to them and they mailed the replacements back.
Hope that helps.
Jeff6566
Member
Can someone tell me where to find the AC filters? I've looked all around the compressor, and also can't find a return air vent in the cabin.
1995 370
1995 370
Arickosmo
Member
If the 95 is anything like the 92 those are your returns and your filters will be behind the grate. washable reusable filter
Arickosmo
Member
oops...never mind this post...link no worky properly.
Last edited:
Arickosmo
Member
kinda looks like those first two pics might be vents and not returns. I'm pretty sure your compressor is under the main berth so your forward return should be the grate at the foot of your bed.
I'll bet your rear return is the one under the salon seat in picture 1
I'll bet your rear return is the one under the salon seat in picture 1
Last edited:
Jeff6566
Member
I'm not close to the boat to go look again ,but I don't remember seeing any returns under the salon seating
Arickosmo
Member
OK. Sorry I couldn't help more.
Arickosmo
Member
1992 cabin door had a funny little "u-shaped" pivoting aluminum pull on the inside bottom of folding door. Any idea where that came from? I don't have a pic. Maybe later this week. I'd like to see all the parts.
SillyKnot2
Member
yes 6.5
370Dancer
Well-Known Member
- Oct 2, 2006
- 2,488
- Boat Info
- 1998 370 Sundancer
- Engines
- 380hp MAG MPI Gen VI with V drives
Your A/C units are self contained, meaning the filter is in front of the evaporator core. It slides in from the top, and is cleanable and reusable. Probably made of aluminum. The forward A/C is under the master berth. the return grille for that system is under the small side seat/step on the starboard side. (at least in the 1998 model). the aft A/C is located under the mid cabin closet, behind the 2 big drawers Pull the drawers out to gain access to the front of the unit, and the filter. The return for that system is the gap between the bottom drawer, and the floor the cabinet sits on.
Sheebiemac
New Member
Hi all, newbie to the board. We're thinking of replacing the camper top enclosure for our 1997 370DA and having a hard time finding sources. We have a SERFXXXX hull ID and the vendors I'm finding online either don't have 370 tops or don't have tops for a '97 370. Any help is appreciated, thanks!!
-Mac
-Mac
Last edited:
AMFM3
Active Member
- Mar 11, 2012
- 1,390
- Boat Info
- 370 Sundancer 1995 Raymarine C 120 Plotter / Radar
- Engines
- 7.4 L Twin inboards,
V-Drives
You won't find a top that's pre-made for your boat. You will need to find a local canvas shop and have it custom made. That's just the way it is with our model in that era.
Mark
Captain Allen
Member
- Feb 2, 2009
- 356
- Boat Info
- 370 EC 1994
- Engines
- 454 Mercruisers, straight drives
If it's like mine, there are screws hidden in the creases in the fabric. Just feel inside the creases.
Arickosmo
Member
^^^Ditto on the 1992.
TN370
Active Member
I think it must have changed in 95. Do yours look like mine in the picture? Here's another. Just not seeing any creases. Particularly on the ends and it feels like that's where it's attached. Just can't see how it could be from the back. No way to get there.
1995 370 Sundancer
