- Aug 23, 2013
- 530
- Boat Info
- 2005 Sea Ray 280 Sundancer
- Engines
- Twin 4.3L 220 HP, Alpha 1 Drives, 5E Genny, AC
Could be the water pressure sensor.
Captn TJ
Active Member
If the beeping isn't related to the IAC you might want to keep it as a spare.
trdehmer
Member
Do those go bad? Where is it located and do you know the part number?
I’m tempted to get the Vesselview for Bluetooth...
Captn TJ
Active Member
Let me know if you get the vesselview for bluetooth. When I first enquired about it I was told my SC system wasn't compatible (2005 280). But I'm not sure the mechanic ever did an install - so I'm very interested.
trdehmer
Member
I ordered it today. I emailed Mercrusier to confirm what part number to get.
Captn TJ
Active Member
Can you keep me posted on the install - including positives and negatives I'm very interested!
Half Off
Member
Good advice. I have to replace mine every couple of years. I always keep a spare aboard.
- Aug 23, 2013
- 530
- Boat Info
- 2005 Sea Ray 280 Sundancer
- Engines
- Twin 4.3L 220 HP, Alpha 1 Drives, 5E Genny, AC
The water pressure sensor is on the power steering cooler.
trdehmer
Member
Is that on the 496MAG? On the microfiche there is no mention of a water pressure sensor mounted on the power steering cooler (unless is it physically part of the power steering cooler??)
https://www.mercruiserparts.com/bam/subassembly/31815/6708/230
There is a pressure sensor on the Seawater pump....
https://www.mercruiserparts.com/bam/subassembly/31815/6708/210
trdehmer
Member
New IAC is in, beep is gone!
New IAC has a spring at the end. Old one didn’t...
New IAC has a spring at the end. Old one didn’t...
Captn TJ
Active Member
I learned something new (and I've got plenty more to learn). I didn't realize that you get an alarm if the IAC goes bad. I thought the sure sign of a bad IAC was if the engine couldn't be started in idle (meaning it needed more throttle to start).
Thanks for sharing. Btw how's the Bluetooth vesselview install going.
trdehmer
Member
IAC install takes about 15min tops on the 496mag. The new IAC has a spring at the end of the plunger (original didn’t).
The electrical connection for the VesselView is right on top of the engine block, right side (at least on my 2003). The Vesselview shows up Friday. Looks like it will take about 5min to install. I already downloaded the App. on my IPhone.
The electrical connection for the VesselView is right on top of the engine block, right side (at least on my 2003). The Vesselview shows up Friday. Looks like it will take about 5min to install. I already downloaded the App. on my IPhone.
Captn TJ
Active Member
IAC is a pretty easy install. Please post pics of your vessel view install, as I know there are others like myself interested in doing the same. Just curious where you purchased the bluetooth module and the cost?
trdehmer
Member
I'll take pics of the install. Purchased off Ebay for $245 shipped.
There is a lot of good info on their website, and on YouTube.
https://www.mercurymarine.com/en/us/gauges-and-controls/gauges-displays/vesselview-mobile/
Captn TJ
Active Member
Nice - can't wait for your feedback on the app. I'm particularly interested in the diagnostics.
trdehmer
Member
So, my boat doesn’t have the yellow weather cap for Vesselview. Apparently that is needed. So had to order that...install won’t happen until I get that.
Captn TJ
Active Member
Hmm I think I saw that on my harness - but not sure can you send me the part number for that and a pic if you can.
Captn TJ
Active Member
Questions for those who change their own oil:
On my 5.0 engine the oil filter is mounted high on the engine. I assume that the oil drains out of the filter when the engine is not running so it can be unscrewed without a mess. Is that correct?
On my 5.0 engine the oil filter is mounted high on the engine. I assume that the oil drains out of the filter when the engine is not running so it can be unscrewed without a mess. Is that correct?
bbwhitejr
Well-Known Member
It will do just that, but it will create a vacuum and not all will drain. Barely loosen the filter enough to break the seal and let some air in. Give it 10-15 mins and no mess.
Bennett