Official 2003.5-2008 340 Sundancer Thread

Anyone replace or upgrade the under swim platform light to Led? My bulb went out this weekend. Looking to know what’s involved to replace and if it can be done with the boat in the water.
 
Hi all just want to share my thoughts on my recent electronics upgrade.I replaced my C80 system with the Axiom rv 9 inch unit and Quantum Doppler radar.The transducer that was installed is the B60 20 degree tilt.I am happy to report all work well together and am pleased with my choice of equipment.Flounder pounder marine supplied the new dash panel that made for a nice installation of the new unit. Thanks to the folks at BOE marine for all their help with my project.
 

Attachments

  • IMG_0790.JPG
    IMG_0790.JPG
    91.6 KB · Views: 242
  • IMG_0789.JPG
    IMG_0789.JPG
    84.2 KB · Views: 244
  • IMG_0792.JPG
    IMG_0792.JPG
    93.3 KB · Views: 240
Last edited:
Hi all just want to share my thoughts on my recent electronics upgrade.I replaced my C80 system with the Axiom rv 9 inch unit and Quantum Doppler radar.The transducer that was installed is the B60 20 degree tilt.I am happy to report all work well together and am pleased with my choice of equipment.Flounder pounder marine supplied the new dash panel that made for a nice installation of the new unit. Thanks to the folks at BOE marine for all their help with my project.

I also upgraded to the Axiom - finally got my adapter and cables for my transducer (from BOE) and I must say the same transducer seem to working better on my Axiom than my old unit. Should be adding the second Axiom 9 this week and networking them. Also have the Quantum being networked.

I am having my panels fabricated out of Black ABS for modern look and should have the full set available once the development work is done.

-Kevin
 
Hey everyone I have wet carpet in my aft cabin, all windows seem to not be leaking, any ideas? Fresh water tank 3/4 full, and we have had some pretty heavy rain recently
 
I have a question. 2006 340 Sundancer with twin mercs 8.L. Does the fuels system pull from both tanks or are they seperate for each motor?
 
I have a question. 2006 340 Sundancer with twin mercs 8.L. Does the fuels system pull from both tanks or are they seperate for each motor?

Port and starboard engines pull from respective tanks and each are separate. Generator pulls from starboard.

-Kevin
 
Hey everyone I have wet carpet in my aft cabin, all windows seem to not be leaking, any ideas? Fresh water tank 3/4 full, and we have had some pretty heavy rain recently

Maybe overflow in the sump pump or leak at cabin door track?
-Kevin
 
I did take a shower I should look in there, but honestly I don’t think it’s from either of those things
 
I did take a shower I should look in there, but honestly I don’t think it’s from either of those things

I guess follow the water. Is there any water forward up? Anything damp or wet in the storage or under the drawer at the panel? If it's coming from outside it usually leaves a damp path - sometimes it's just hard to find.

-Kevin
 
Yea I wish there was a path, seems to be seeping into the carpet from the back corner of the aft on the port side. I’m hoping it’s just residual from me leaving that window open, who knows. The cabinet under the bathroom sink was wet also
 
Yea I wish there was a path, seems to be seeping into the carpet from the back corner of the aft on the port side. I’m hoping it’s just residual from me leaving that window open, who knows. The cabinet under the bathroom sink was wet also
That would be coming from under the vacuum. My bath sink always leaked bad and the cabinet got wet but never so bad to get to the carpeting (turned out to be a cracked sink).

I have heard of the portlights leaking and dripping behind the head shell but I would think that would be showing at the carpet by the steps.

-Kevin
 
Port and starboard engines pull from respective tanks and each are separate. Generator pulls from starboard.

-Kevin
So if one gets low.. it won’t pull from the other one?
 
Quick question, I have 340 Sundancer with a live well. Anyone know what gpm pump is used? I need to replace.
 

Forum statistics

Threads
112,950
Messages
1,422,864
Members
60,932
Latest member
juliediane
Back
Top