taroberts
New Member
- Jun 4, 2011
- 1
- Boat Info
- Sundancer 300 - 2006
- Engines
- 5.0L Mercruisers | Bravo III Drives
Hello all - new owner and first time poster here...
Can anyone out there point me in the right direction when looking for the factory mounting location of the Northstar 491 Sounder Module?
I have a factory installed 6000i Chartplotter and when selecting the "Sounder" function the unit claims "Echo Sounder Not Installed". I have verified that there is a transducer mounted in the bilge with a cable routing up the starboard raceway. Also, I have taken the chartplotter along with the gauge cluster out to gain access to the underside of the dash. This yielded no sign of the Sounder module nor the radar module - only the NS100 radio interface.
I figure that the sounder must be located nearby the radar interface, but where to look next?
Can anyone out there point me in the right direction when looking for the factory mounting location of the Northstar 491 Sounder Module?
I have a factory installed 6000i Chartplotter and when selecting the "Sounder" function the unit claims "Echo Sounder Not Installed". I have verified that there is a transducer mounted in the bilge with a cable routing up the starboard raceway. Also, I have taken the chartplotter along with the gauge cluster out to gain access to the underside of the dash. This yielded no sign of the Sounder module nor the radar module - only the NS100 radio interface.
I figure that the sounder must be located nearby the radar interface, but where to look next?