New or used parts for a 460 sundancer 2001

[Rod-Cartagena]

Lookin for a good supplier in USA of parts for our 460 Sundancer 2001, new or used parts, the propeler for the bow thruster is brokrn, same a hydraulics fot the swin platform and the trims are no good at all, as you can see we need help out there.

 

[superwa]

Checked Flounder Pounder? I also use E-bay quite a bit or go to the local deal as a last resort.

 

[bahamabreisus]

Your thruster prop will most likely have to come from the manufacturer of the unit. You will need to know what brand and model you have. Almost the same thing with the platform, unless its hydraulic lines leaking, they should be able be made locally, just bring old ones with you. Trim tabs a also hydraulic, make sure to check the fluid level, if low you most likely have a leak in the system as long as the pump itself is working.

 

[NotHerDecision]

As others are saying, you are typically best ordering from the manufacturere or distributor of the system needed. For Example, your trim tabs are Bennett, so call them or look in your parts manual to get the proper number then buy from one of their distributors.

You can always go through your Sea Ray dealer, but I assure you they source from the same place and mark up the parts, they are of no better quality and it slows the entire process significantly.

Welcome to the 460 club, I see you are quite experienced with Sea Ray!