Hello,
I have mounted new manifolds, risers, full flow gaskets as it was before, new exhaust hoses, new waterpump with impeller and so on.. on both my engines.
I have a half closed coolingsystem
At start up my port engine got seawater flow in about 4 seconds.
My starboard engine diden't get any flow so i stopped the engine after 10sec and disconnected the hose to the oil cooler and there you heard the air pushed out and after that i got flow.
The thing is that the waterflow still is a little little weeker than the port engine. And the SB riser is warmer the the port riser but there you have the oilfilter mounted witch lead som heat ( cant have my hand on that mount to warm)
The engine temp is at idel around 75C and on fast mode around 80C.
Im worried that the SB engine' SB riser is going to hot.. while under load.
What do you think?
/ Kim
I have mounted new manifolds, risers, full flow gaskets as it was before, new exhaust hoses, new waterpump with impeller and so on.. on both my engines.
I have a half closed coolingsystem
At start up my port engine got seawater flow in about 4 seconds.
My starboard engine diden't get any flow so i stopped the engine after 10sec and disconnected the hose to the oil cooler and there you heard the air pushed out and after that i got flow.
The thing is that the waterflow still is a little little weeker than the port engine. And the SB riser is warmer the the port riser but there you have the oilfilter mounted witch lead som heat ( cant have my hand on that mount to warm)
The engine temp is at idel around 75C and on fast mode around 80C.
Im worried that the SB engine' SB riser is going to hot.. while under load.
What do you think?
/ Kim