I recently got a 1998 Sea Ray 290 Sundancer and I am in the process of changing all the lights to LED among other things. The inside is covered in Gold, knobs, switches. lights etc. My wife hates it and I don't blame her. I started to recently switch things to chrome/silver and I am in the process of doing the lights. There are covers over the above cabin light fixtures, 2 are large the rest are small. My plan was to paint them chrome, however the plastics lens seems to be attached to the outer gold cover and it would be very hard to tape off. Has anyone replaced just the lens and gold cover? I am fine with the fixture itself, its all LED now. Unless its easier to replace it all. Thanks!
New Cabin Light Covers
- Thread starter Dneon95
- Start date
Skip Boyer
Active Member
- Sep 24, 2015
- 193
- Boat Info
- 1998 500DA Sundancer, 1999 Maxum 2800, 1998 270 Sundancer, Oliver Hazard Perry FFG-7
- Engines
- Twin Detroit 6V92TA
Take a look at the web site for e-trailer. I found replacement fixtures for several of mine on there site in the RV lighting section.
Little Ducky
Well-Known Member
- Jun 5, 2017
- 2,654
- Boat Info
- 1998 290 Sundancer
- Engines
- Twin EFI 5.0L w/Alphas
Kohler 4kW
Congrats on a great boat.
Where are you located in the world?
BTW it's easier just to embrace the gold.
Where are you located in the world?
BTW it's easier just to embrace the gold.
I painted all of ours. I taped them off with blue painters tape, put it on rough and cut around with a sharp blade. Worked well
