NEMA 200 kit

Discussion in 'Bennett Trim Tabs Vendor Forum' started by Doc O Rock, Mar 18, 2017.

  1. Doc O Rock

    Doc O Rock Member GOLD Sponsor

    192
    Mar 23, 2016
    Lake St Clair, Belle Maer Harbor
    1999 380 Sundancer
    twin 7.4 Merc
    NEMA 2000 kit

    I had the bottom done on my 99 380, and the guys took the tabs and actuators off to do the bottom, so I thought what better time to upgrade since they have to re-install them anyway. I bought the NEMA 2000 kit from Bennett to capture the data on my Garmin 7212, and possibly install the ATP latter this year. After they re-install the actuators, other than connecting to my existing NEMA 2000 back bone, is there anything else I need to do right away?Thanks in advance.
     
    Last edited: Mar 19, 2017
  2. blaster

    blaster Active Member SILVER Sponsor

    May 23, 2011
    potomac river
    2010 sea ray 205 sport
    F150 5.4 xlt 4x4
    Mercruiser 4.3 mpi alpha 1.62
    NMEA 2000 National Marine Electronics Association

    Not NEMA 200

    Maybe someone will chime in with helping set up the tab data.
     
  3. Tabman

    Tabman Member

    667
    Jan 11, 2007
    The Tab Cave
    boatless
    boatless
    Normally you will need to consult the manual for the display you wish to display the Trim Tab position on to "turn on" Tab position and calibrate the system.

    Tom
    Bennett Marine
     
  4. Doc O Rock

    Doc O Rock Member GOLD Sponsor

    192
    Mar 23, 2016
    Lake St Clair, Belle Maer Harbor
    1999 380 Sundancer
    twin 7.4 Merc
    Thanks Tom. My Garmin 7212 does have the capability.
     

Share This Page

Show Sidebar