Need Electronic Switch Pad for year 2000 190 Signature Bowrider

Discussion in 'Sport Boats' started by beernutz, May 6, 2014.

  1. beernutz

    beernutz Member

    427
    Aug 16, 2009
    Mobile, AL
    2000 190 Signature BR
    5.0L EFI 240 hp Mercruiser
    My electronic switch pad on my 2000 190 signature bowrider apparently is fried according to the mechanic looking at it and so far he has been unable to find a replacement. The parts I need appear to be 1123785 and 1142314 according to the parts diagram below. Does anyone know a good source for these parts?
    Thanks in advance![​IMG]
     
  2. beernutz

    beernutz Member

    427
    Aug 16, 2009
    Mobile, AL
    2000 190 Signature BR
    5.0L EFI 240 hp Mercruiser
    Nevermind. I searched all over the internet including FP's website and came up with nada so I called Sea Ray and was told the 1142314 part is no longer made and none are in inventory but they had a replacement for a mere $245 shipped. Since the boat is a huge doorstop without this part I forked it over.
     
    Last edited: May 6, 2014
  3. Bt Doctur

    Bt Doctur Well-Known Member

    Aug 21, 2010
    New Jersey
    Ex SRV 240 Weekender twin
    in between
    Maybe it`s time to switch back to a analog panel
     
  4. Scoyager

    Scoyager New Member

    20
    Apr 19, 2013
    Northport, NY
    240 Sundancer 2000
    Merc 5.0 Bravo II
    Did you get both parts for $245? I replaced the keypad aka "Peanut" in my 2000 Sundancer only to find out that the Elecontronic Interface Module was the real culprit. I think the only thing that had been wrong with the keypad was that the back lighting was shot. At least with both parts new they should last awhile. Replacing the keypad was easy but ran into a problem replacing the EIM. Several of the male pins on the old EIM were corroded so when i tried to take out the wiring harness plug they broke off in the plug. Luckily i was able to drill out the pins so i didn't have to replace the harness as well.
     
  5. beernutz

    beernutz Member

    427
    Aug 16, 2009
    Mobile, AL
    2000 190 Signature BR
    5.0L EFI 240 hp Mercruiser
    No, the part 1142314 was $245 shipped by itself without the EIM. I think I was first quoted $279 + shipping but the lady I spoke to ultimately offered it to me for the $245 so I snatched up that "bargain".
     
  6. Scoyager

    Scoyager New Member

    20
    Apr 19, 2013
    Northport, NY
    240 Sundancer 2000
    Merc 5.0 Bravo II
    I paid around $260 for the switch pad and more then that for the EIM. I ordered from a Sea Ray dealer and I'm sure they marked up both parts substantially. Hopefully all you need is the pad. Good luck and let us know how you make out.
     
  7. beernutz

    beernutz Member

    427
    Aug 16, 2009
    Mobile, AL
    2000 190 Signature BR
    5.0L EFI 240 hp Mercruiser
    I took the boat to my closest MarineMax which is just over an hour away and they diagnosed the EIM as also being bad in addition to the fried switch pad. An EIM was ordered last week ($305) but hasn't arrived yet. Fingers are crossed that the new parts will fix things.
     
  8. Asbjorn

    Asbjorn New Member

    1
    Nov 2, 2014
    Copenhagen, Denmark
    260 Sundancer, 2002
    5,7 Mercruicer, Bravo III
    Hi, I'm in Copenhagen, Denmark with same Issue :-( Am I correct in understanding that both the switchpanel and the EIM was order from Sea Ray (but thru a dealer, Marine Max? Can I ask for the parnumbers used foe ordering? I have a 260 Sundancer from 2002.

    Thanks. Br. Asbjorn
     
  9. Bt Doctur

    Bt Doctur Well-Known Member

    Aug 21, 2010
    New Jersey
    Ex SRV 240 Weekender twin
    in between

Share This Page

Show Sidebar