Need 1975 Searay SRV Window Moldings

Discussion in 'Classic Sea Rays' started by Chuck Vohs, Jan 29, 2020.

  1. Chuck Vohs

    Chuck Vohs New Member

    16
    Aug 5, 2019
    1975 Sea Ray SRV 240 Sundancer
    2 4 cyl
    Does anyone know where to get these? Or,has anyone been able to 3D print window moldings?
    I need the inside and outside rings for almost all my windows.
    You can see the boat in the photo.
    Thanks!
    imagejpeg_0_01.jpg
     
  2. Chuck Vohs

    Chuck Vohs New Member

    16
    Aug 5, 2019
    1975 Sea Ray SRV 240 Sundancer
    2 4 cyl
    Don't laugh too loud...I put in the 2 acre pond to test the motors (I only had one of those fins to use) and of course to drive in a couple of circles, just to say "I did it!"
     
  3. dwna1a

    dwna1a Well-Known Member GOLD Sponsor

    Apr 23, 2012
    James River
    88 Weekender 300 "Seahorse"
    Twins 350
    I'm not sure what part it is your looking for. Can you post a photo or explain
     
  4. Chuck Vohs

    Chuck Vohs New Member

    16
    Aug 5, 2019
    1975 Sea Ray SRV 240 Sundancer
    2 4 cyl
    Sure, sorry.
    Here's one of the windows. Each of them also has the same trim inside. All of the windows are fine, but most of the trim pieces are cracked or broken. I do have one or two that is not broken. I was thinking about having them 3D printed (or using that as an excuse to buy a 3D printer!)
    IMG_20200131_143044.jpg
     
  5. duckhead69

    duckhead69 Member

    87
    Jun 11, 2010
    michigan lake Erie
    2006 Nova
    1989 215 sundowner
    1986 300 weekender lowrance HD-5
    350 chevy inboards velvet drives
    NOT SURE WHERE you are located but we have boat junkyards here in Michigan try there or ebay
     
  6. Sleeves

    Sleeves New Member

    9
    Dec 4, 2010
    Lake Michigan, Indiana
    I have a 30' Weekender "project" on a trailer not running.

    I have a working Twin 165 1974 24' We
    30' has Twin 255 GM inboards

    24' Has Twin 165 I/O's
    Those are hard to find. Most of the ones in the junkyards are picked over or broken too. I would be interested in buying some too if you find someone to print them.
     

Share This Page

Show Sidebar