Main Engine bronze water pickup scoop #186502

Discussion in 'General Maintenance/Repair Questions' started by Cherman, Jan 2, 2016.

  1. Cherman

    Cherman Member

    183
    Aug 15, 2004
    Oriental, North Carolina
    1999 480 DB (SOLD)
    Cat 3196's
    Does anybody know the manufacturer (I believe Groco) of the water intake scoops on my 480DB? They are used on many Sea Ray models thru many years. Last time the boat was pulled, I noticed that needed replacement IE: slotted fins missing. It was a short haul and didn't have time to do it. Would like to have on hand before next haul. The Sea Ray part number is 186502
    Thanks, Chris
     
  2. Bt Doctur

    Bt Doctur Well-Known Member

    Aug 21, 2010
    New Jersey
    Ex SRV 240 Weekender twin
    in between
  3. Cherman

    Cherman Member

    183
    Aug 15, 2004
    Oriental, North Carolina
    1999 480 DB (SOLD)
    Cat 3196's
    Not it. Intake size is 2.5" and it's the scoop only. I lost the rough measurements I wrote down when it was hauled, but I believe it was something like 5.5" by 8". That is a guess, could be way off.
     
  4. Lazy Daze

    Lazy Daze Well-Known Member TECHNICAL Contributor GOLD Sponsor

    Apr 21, 2009
    PA
    Various
    Various
    I believe you're correct that it is a Groco piece. http://www.groco.net/strnrs.htm Page down to the "SC" strainers and click on that.

    It should be the 2500 series. You can probably just google the part number to find a place to buy it.
     
  5. Lazy Daze

    Lazy Daze Well-Known Member TECHNICAL Contributor GOLD Sponsor

    Apr 21, 2009
    PA
    Various
    Various
    I just looked up your part number - it returned this picture. You already know this, but just for a reassurance :smt001

    [​IMG]
     
  6. Cherman

    Cherman Member

    183
    Aug 15, 2004
    Oriental, North Carolina
    1999 480 DB (SOLD)
    Cat 3196's
    Dennis, Thanks, already saw that page but can't reference the sea ray part# over to Groco. Probably going to call Sea Ray on Monday and see if they will give me the cross reference pt. #. If I didn't loose the measurements, I would not have been in this predicament. You are correct on the 2500 series being the closest to what I think they measured and matches the intake size. Thanks, Happy new Year.
     
  7. Cherman

    Cherman Member

    183
    Aug 15, 2004
    Oriental, North Carolina
    1999 480 DB (SOLD)
    Cat 3196's
    Yeah that looks like it. You posted quicker than I typed my last.
     
  8. Cherman

    Cherman Member

    183
    Aug 15, 2004
    Oriental, North Carolina
    1999 480 DB (SOLD)
    Cat 3196's
    Dennis, Is that the Groco SC-2500 or SC-2520 Hi Flow in your last pic you posted?
     
  9. Lazy Daze

    Lazy Daze Well-Known Member TECHNICAL Contributor GOLD Sponsor

    Apr 21, 2009
    PA
    Various
    Various
    Yeah, the Sea Ray part numbers are completely internal. There is no correlation between them and the manufacturer's part number. Nothing else I have access to right now tells me if it's hi-flow or not. However, looking at the picture, above, and the pictures on Groco's website... it does "appear" to be a hi-flow version based on the thinner ribs.
     
  10. Cherman

    Cherman Member

    183
    Aug 15, 2004
    Oriental, North Carolina
    1999 480 DB (SOLD)
    Cat 3196's
    I agree it's probably hi-flow. I found a source already Thanks
     
  11. Parrish

    Parrish New Member

    1
    Jan 21, 2020
    2008 44db sea ray Dual e120,s
    Cummins
    Can anyone please tell me where you find this correct part. Thank you
     

Share This Page

Show Sidebar