Location of the Glomex Antenna Gain Control Splitter

argus1

Member
Apr 12, 2015
196
Apollo Beach, FL
Boat Info
2011 350 Sundancer
Engines
MerCruiser 377 MAG ECT w/Bravo III Drives, Axius
Where is the 4-way splitter from the Glomex Gain Control on a 330/350 Sundancer to connects to the televisions? The back of my gain control has 3-Coaxial connections (antenna in, shore in and television out). The Sea Ray manual shows the gain control connected to a four-way splitter. There are two televisions on the boat now and I want to add a third on the cockpit.
 
Not sure how a 350 is set up. I found mine behind the access panel inside the audio/visual cabinet. It is actually velcroed to the outer hull. Hope that helps.
 
Why dont you add a small 2 way splitter behind tv closest to cockpit and run new wire from that location to your desired location in the cockpit.
 
Why dont you add a small 2 way splitter behind tv closest to cockpit and run new wire from that location to your desired location in the cockpit.
That is an option that I am considering; I was hoping that locating and using the factory installed splitter would be an easier option.
 
That is an option that I am considering; I was hoping that locating and using the factory installed splitter would be an easier option.
If there is one. Depends on location of factory splitter running wire could be more difficult. Assuming that your antenna is installed on the arch, installing 2 way splitter inside arch would be easiest option and allow for running wire shortest way.
 
Update: There was a four-way cable splitter behind the main distribution panel in the cabin. Just note; you don’t want to have multiple splitters for the same antenna because it will degrade the signal.
 

Forum statistics

Threads
112,948
Messages
1,422,805
Members
60,930
Latest member
Ebrown69
Back
Top