LED Bulb conversion

[spitfire36o]

I just purchased a 97 240 Sundancer. my first mod is changing out all the incandescents to LED's. I have a courtesy light under the help seat that uses a bulb ive never seen before. Its a 2 prong, 2 lead bulb but much smaller than normal. On the bulb its labeled "J.S. 90 12V6CP". Does anyone know what will fit in here?

 

[JimG]

Check here:
http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Ffestoon.html

 

[charlg]

It sounds like my cabin recessed light bulbs, small two prong. I looked them up in my parts manual and they are listed as 10W Halogen bulbs.

 

[spitfire36o]

Thanks for the response but they are not the fuse type bulbs. See a pic below.

http://i28.photobucket.com/albums/c202/spitfire36o/IMG00232-20110404-2158.jpg

http://i28.photobucket.com/albums/c202/spitfire36o/IMG00234-20110404-2159.jpg

 

[JimG]

OK... that's called a bayonet base. How about 1142 or 1157:

http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2F1142-x15.htm

 

[spitfire36o]

The bulb is only about an inch high. Those bulbs are almost an inch and a half. I can't even find an incandescent replacement for this?!?!?!

 

[cpchillin]

You could change the fixture itself to one that is easily sourced.

 

[pchansen]

Those are the same lights that SeaRay uses in their cockpit courtesy lights. I've replaced them with Blue LEDS. I will be home on Tuesday and look up the number and brand for you.

 

[pchansen]

Here they are: http://www.ledlight.com/SearchResult.aspx?KeyWords=84634

These should be just short enough to fit your application.