Leaking Port Lights

[NoWakey]

Both port and starboard front port lights are leaking water on our 2002 240 DA. They are the Bomar units. Just to answer this question first, the cam locks have all been adjusted and the gasket seals on the inside are all in good shape, this is not where the leaks are coming from.
On both lights the water leak is coming through one of the screws in the bottom of the inside bezel. My intention was to take them apart and reseal. But, here is where the problems start. I can not get either the outside, or inside trim bezels off! I don't know if SeaRay stuck these things on with 5200 or what!
I have spoken with both MM, and SeaRay, niether have been much help. Any commentary would be greatly appreciated.

Cheers,

Jim

 

[estebanj]

While others answer, you can also try Bomar/Pompanette customer service.

http://www.pompanette.com/pompweb.n...0d25fe6f5413d2388525679f000c50e4?OpenDocument

http://www.pompanette.com/bomar

Esteban

 

[NoWakey]

Let me be more specific about what would help here.....
It is pretty clear that the removal of the outside trim bezel on these port lights is not going to be possible without ruining them.
Does anyone have any experience with resealing the outside of the light frames without a goobering things all up???
Thanks in advance.

Jim