Leaking Anchor Locker

Discussion in 'Ask a Sea Ray Employee...(No Longer Active)' started by webfoot, Oct 20, 2009.

  1. webfoot

    webfoot New Member

    Aug 23, 2009
    1999 Searay Sundancer 260 Hitched to a 2006 GMC Crew Longbed 6.6 Duramax
    5.7L 2 barrel 250hp Bravo II
    Hay SRE;
    I've got a new to me 1999 Sundancer 260 with crackes in the bottom of the bow anchor locker that fills the center V-birth compartment with water the anchor compartment drains are clear need to seal it right the first time.........Has anyone had this problem and how do you correctly seal the bottom of the anchor locker........

    Last edited: Oct 26, 2009
  2. Nehalennia

    Nehalennia Well-Known Member

    Aug 22, 2007
    Marysville, WA
    2001 310DA twin 350 MAGs, Westerbeke 4.5KW
    Twin 350 MAG V-drives
    Not good.

    AKBASSKING Active Member

    Apr 13, 2008
    SE Alaska Summer/Columbia River winter
    1988 Yacht Fisher
    Twin 375hp Cat 3208 T/A

    Mine was doing the same thing, but I have a teak bow pulpit. Had to pull everything apart. Lots of work.
  4. Tmill

    Tmill New Member

    Oct 28, 2009
    Lake Erie
    Boatless today
    I just had a '98 250 DA sureveyed with elevated moisture readings in the anchor locker. The sureveyor told me that Sea Ray did not use marine grade plywood in the anchor locker on the 98 models. Not sure about 99? And that I needed to sand the gel coat down to the plywood, let it dry out and re epoxy the locker? I have not looked into doing this yet, fyi....
  5. Lazy Daze

    Lazy Daze Well-Known Member TECHNICAL Contributor

    Apr 21, 2009

Share This Page

Show Sidebar