nunmakr
New Member
I am looking to hardwire a 1200W inverter into my 2011 195 sea ray to run Christmas lights for our annual Christmas parade. I know I need to install a 100 amp ANL fuse as close to the battery as possible on the POS cable. I also know I run the NEG cable to the NEG terminal on the battery. Also, the inverter should not be in the engine compartment. My question is, where do I run the ground wire to (if I need to at all)? DO I run it to the engine, the neg battery terminal or other?
I had my boat in the parade last year but did not do much research to make sure it was wired safely.
Thanks,
Scott
I had my boat in the parade last year but did not do much research to make sure it was wired safely.
Thanks,
Scott