Hydraulic Seat Pedestal

[Motex]

The pedestal on the helm seat must have blown a seal as all the hydraulic oil leaked onto the deck. If any one has a tip, or has worked on these, I would be grateful for any advice or tips.

 

[mistercomputerman]

Check and see fi the seat base is a Garelick. If so, get the part number off the cylinder inside the seat base (some disassembly required). The number is something like S 10 28 0080 1 0288 GZ18 AB16 00500N /7.

http://www.hahn-gassprings.com/Orderex.htm


Then email this guy to get one:[FONT=Arial, Helvetica, sans-serif]n[/FONT]
[FONT=Arial, Helvetica, sans-serif][/FONT]
[FONT=Arial, Helvetica, sans-serif][FONT=Arial, Helvetica, sans-serif]Bob Wagner[/FONT][/FONT]
[FONT=Arial, Helvetica, sans-serif]aegis@hahn-gassprings.com[/FONT]


I just got one. Cost was about $150 or so.

 

[Motex]

Thanks, I'm taking it apart this weekend.