Hull Vent Cover

[GLENN OREHOSKY]

One year later and now the stbd side is missing. Someone stole it. can anyone help me buy a new one?

LOOKING FOR
773051 COVER HULL VENT 330DA 95 PORT
782557 COVER HULL VENT 330DA 95 STBD

I'm struggling to locate these vents. Any help? I will even take a salvage vent from a total loss
1998 Sundancer 330

THANKS FOR ANY HELP

 

[Blueone]

I would be pissed if someone stole mine.... what is wrong with people.

The guy has 3 or 4 different sizes... Maybe measure your size rather than trying to stick with a specific part number. You could always move the christmas tree plugs around

https://www.ebay.com/itm/SEA-RAY-68...356577&hash=item2f1ebd5848:g:Ii8AAOSwE0JY9j8V

 

[JVM225]

Try contacting eBay seller Searayman directly through that site. It’s been a few years since I got anything from him but he is local to me and when I met him I found him to be knowledgeable and friendly.

 

[sr330daguy]

tdschafer a member here has a contact that is reproducing them

 

[Mike Steinmetz]

One year later and now the stbd side is missing. Someone stole it. can anyone help me buy a new one?

LOOKING FOR
773051 COVER HULL VENT 330DA 95 PORT
782557 COVER HULL VENT 330DA 95 STBD

I'm struggling to locate these vents. Any help? I will even take a salvage vent from a total loss
1998 Sundancer 330

THANKS FOR ANY HELP

Hi Glen - Any luck? Same boat - need one for the port side.

 

[tdschafer]

Hi Glen - Any luck? Same boat - need one for the port side.

There was a guy on here, Tony Clark, in the UK who was making them. I'd try & track him down. I had my fiberglass guy make a set for my boat several years ago from a borrowed set used to make the molds. I have tried to get him to make more for people needing them but he's close to 80 & mostly retired. He hasn't made a set in a couple years.

 

[Blueone]

do you guys have a picture of this vent ?

 

[Creekwood]

do you guys have a picture of this vent ?

Click the eBay link in the 2nd post. Its still an active ad and shows the vent. FYI I had one fall off and bought one from the same eBay seller. Its OEM and fit perfectly on my 97 330DA. It comes with the installation trees.

 

[Mike Steinmetz]

Thanks but not the same one. The ‘98 version curves from top to bottom and also from bow to aft where it wraps around the corner of the boat. It also flares from narrow to wider going from bow to aft. Beveled edges on the contact surfaces too. Obviously not a simple piece to make. I’ll try to post a pic.

 

[Mike Steinmetz]