NWFLDavid
New Member
- Feb 8, 2009
- 3
- Boat Info
- 1989 Amberjack 27
- Engines
- Twin 383 Striker W/Bravo III Drives
Howdy All!!
I really need some help solving a (hopefully) simple issue. I have a 1989 27 Amberjack with a very corroded anode attached to the hull about 3 feet from the stern on the starboard bottom. It measures about 3" X 12", and the bolt holes passing thru the hull are 8.5" apart. There are numerous cables attached to it inside. My mechanic ordered one and it was way too thick and didn't have a beveled edge like the original. Could some kind soul point me in the direction of a part number and good supplier of this beastly part? I would be forever grateful!
I really need some help solving a (hopefully) simple issue. I have a 1989 27 Amberjack with a very corroded anode attached to the hull about 3 feet from the stern on the starboard bottom. It measures about 3" X 12", and the bolt holes passing thru the hull are 8.5" apart. There are numerous cables attached to it inside. My mechanic ordered one and it was way too thick and didn't have a beveled edge like the original. Could some kind soul point me in the direction of a part number and good supplier of this beastly part? I would be forever grateful!
