How to open Cruisair remote mount electrical box???

srad

New Member
Jul 26, 2015
10
New England
Boat Info
2005 320DA
Engines
6.2L Mercruisers
I have a Cruisair SXF12/1-RMT A/C that will not "start" off my Kohler 5E generator. Works fine off of shore power. Going to have the generator checked but It runs everything else without a problem.
I suspect I might have a "weak" start capacitor. So, I also suspect, there is a start and a run capacitor in my remote mounted electrical box.
The box is mounted on a bulkhead wall with four screws.
Question is once the box is off the wall does anyone know how it opens? It appears there is a screw at the top of the case and I am guessing that if unscrewed the case would slide open.
Don't want to take the box off the bulkhead only to find I need some special tools to open it or a secret "handshake" from Dometic.
Any help would be appreciated if someone has had a similar problem or has gotten into one of these remote boxes.
Thank You
Steve
 
OK. No replies. FYI:
Removed four screws that secure remote mounted electrical box to bulkhead. Backed out small screw on the front of the remote box. Cover slides off.
Box contains electrical circuit board, start assist kit, and run capacitor.
 

Forum statistics

Threads
113,229
Messages
1,428,965
Members
61,120
Latest member
jingenio
Back
Top