TheDrewSpot
New Member
- May 24, 2021
- 7
- Boat Info
- 1990 Sea Ray
- Engines
- 4.3 V6
Hello! I’m in need of some advice. I have a 2004 Sea Ray 200 Select with a 5.0 Mercruiser. The factory radio went out so I replaced with a marine Kenwood and went ahead and updated the speakers while I was at it. Everything worked great for about 15 min. Then, the radio shut down and the boat started alarming. I’ve pulled all fuses under the dash (with none directly related to the radio), the stereo memory fuse by the battery, and the 2 inline fuses (yellow and red wire) behind the radio. All were good. If I put the radio directly on the battery, it works. I connected an ohms meter to the yellow wire and it reads 12.4 Volts, the red ignition wire reads nothing. What am I missing?
wow mine did the EXACT same thing. Did you try starting the boat, if so did alarm go off? I was told the alarm is due to no oil pressure when sitting there not running and key turned on.
I just ordered a different radio to see if it works. I was thinking the radio may not be compatible for some reason.
I wish I took a pic of the yellow and red wires before I cut the old harness off. One of the posts below is making me wonder if the red and yellow are opposite from the radio red and yellow.