Hatch Lift Actuator

[mistercomputerman]

Does anyone know a good source for a replacement hatch lift (Warner electric linear actuator)?
2001 410 DA Gas
12" throw
20" hole to hole closed
32" hole to hole extended
currently installed Warner DM12-20B5-12CE 2100

Thanks

 

[wingless]

Mine got weak and I replaced just the moter, lubed the lead screw and the transmission. It's been fine for many years.

 

[mistercomputerman]

Thanks

The motor runs fine. The problem is in the cylinder assembly, so I am just going to replace the whole thing and forget about it.

 

[wingless]

The linear actuator doesn't have a cylinder.

 

[teamsearay]

got mine at rex marine--$250 brand new and stainless steel,it was the same that came on my 2000 340da .

 

[wingless]

My recollection is the motor cost under $100, which I thought was high. I just lube everything every coupla years and it's holding up (pun?) just fine.

 

[Skip]

I replaced both actuators on my 03 420DA with the OEM part-Acculift Linear Actuator, Around $335 each. I checked the price from Acculift, and after tax and shipping the Sea Ray Dealer parts counter price was competitive with Accullift, so I ordered through my local dealer.

Skip

 

[mistercomputerman]

Thanks for the help. I found the exact replacement at Great Lakes Skipper for $189 new. Sea Ray price $577. Should be here tomorrow.

 

[Four Suns]

Let me guess... You went to the "local" dealer and they multiplied the list price by 1.5

 

[mistercomputerman]

Well, I did see them pounding away at the calculator before they gave me the price and I don't think they were using the subtraction key. They did tell me that I could have it for free if I bought a new boat.

 

[drhoskins]

Did Great lakes skipper have this part listed on the website or did you have to call them. I couldn't find it online. Mine is a weak motor rather than the actuator cylinder. Hoping to find just the motor.

 

[rcknecht]

I found one for about $291 from a dributer in NJ... Do a google search witht the part number... I hit mine with a lot of silicon spray and it seems to be working fine now...


Forgot to mention... You have to call Warner to get the replacement part number... MM wanted $900 for the same actuator I could get for $291...