has anyone replaced the window seals on a 1986 268 weekender?

[lime4x4]

I'm talking about the 2 long cabin windows. I contacted taylor made and they sent me pics of the seals but i can't tell if there the ones or not

 

[charlesk16]

I had to on my 1982 260 Express Cruiser. Got new stuff from Taylor made.Mine were hard as a rock, and had to remove entire window and break-out old material. Taylor calls it :Flocking". See if they will send you a sample. Mine cost about 95 cents a FOOT, NOT cheap and you will need close to 90 ft. to do both sides. Pulling out the windowss seemed better so I could re-seal the frame in. And you can work on a bench or table. Make sure you pay attension the the drain slots on bottom of frame. you may have to cut drain holes into flocking at those points.

Good Luck. VERY common on the 1980's vintage Sea Ray's.

 

[lime4x4]

my windows are only around 4 feet long each. I emailed taylor and there going to send me some samples

 

[Lazy Daze]

Can't offer any specific help, myself... but:
http://clubsearay.com/forum/showthread.php?t=20043

 

[lime4x4]

yeah i saw that thread but my windows aren't anything like his. Thanks thou