Gas Guage not Working

chaslanier

Member
Mar 7, 2017
34
Lake Lanier GA
Boat Info
2006 Sundancer 320
Engines
Twin 350 MAG w/V Drives
Recently updated from SC5000 to VV7. Everything is hooked up but the starboard gas gauge has stopped operating. Replaced fuel sending unit and gauge bounces to full then back to empty. All other gauges in the 5 n 1 work correctly on a 320 Sundancer. Any suggestions?
 
Did the gauge work at all since the VV install? Does the VV show a reading for starboard fuel? Asking because on mine, after VV4 install, one of the gauges was not working. Turns out the gauge readings including tach actually pass through VV. The "Easy Link" settings in VV have to be correct for all the signals to pass through.
 
I think the first step is to check that the tank is set up in VV, it should show up in the device list. Then, once it's showing in VV, check the Easy Link settings. I had to play around quite a bit with the settings as the documentation isn't great.
 
Thanks! Will try this. Port works fine. You are so right about the documentation not being the greatest.
 

Forum statistics

Threads
112,950
Messages
1,422,863
Members
60,932
Latest member
juliediane
Back
Top