Fuell gauge issues

[SeaRenity]

Does anyone know if there is a method to check the actual fuel gauge. I have replaced my sensors ( both to Royce ) port tank and gauge work fine, starboard will not read past half. I know the tank is full because I could see the level when I replaced the sensors. I have checked the ohms of the sensor and I know the sensor is good ( reads 240 to 30 as I slide the float). I have a SC100 system link 4 n 1 analog fuel gauge Any suggestions
Thanks, Rich

 

[ASH]

Change the wires with one you know works at the dash.

 

[go2pamlico]

I agree with Ash's suggestion to switch the wires to the gauges. What were the problems that led you replacing the sensors? Have those problems gone away?