mark guthrie
Member
Guys, thanks for input. Delayed on install. Will do tomorrow.
here is what I am understanding. Each of my 4.3l have a lift pump from the gas tank. There is a "rubber" gas line as input...this is where the GFS 10 gets spliced in.
as for the mounting of the chart plotter, looks like the best place is to the right of the dash gauges.
Rollercoaster, so don't use gel packs.
my understanding is the GFS 10 will work on any gas engine, injected or not, as long as there is not a return to the fuel tank.
here is what I am understanding. Each of my 4.3l have a lift pump from the gas tank. There is a "rubber" gas line as input...this is where the GFS 10 gets spliced in.
as for the mounting of the chart plotter, looks like the best place is to the right of the dash gauges.
Rollercoaster, so don't use gel packs.
my understanding is the GFS 10 will work on any gas engine, injected or not, as long as there is not a return to the fuel tank.