MAKC
Member
- Oct 23, 2006
- 519
- Boat Info
- 1997 400 Sedan Bridge
- Engines
- 3116 Caterpillar
Ive been winterizing my 2003 Sundancer with the 5.0 MPI engine and i have a question. How do i fog the engine? Ive read through the service manual and it doesnt say how to (or even TO do it for that matter). Do i just pull the air cleaner off and spray into the intake? Ive drained the water from the block and am ready to put the "ear muffs' back on the outdrive to pull the anti-freeze into the engine. Is there anything besides just putting several gallons into a 5 gallon bucket and running the engine to siphon the anti-freeze in there? The winterizing check list from Stroemeister was awesome but this is the first time ive ever tried to winterize my boat. Thanks in advance!
Edit: I should also add that my boat will be stored indoors in a climate controlled garage (no lower than 45-50 degrees even in the dead of winter).
Mike
Edit: I should also add that my boat will be stored indoors in a climate controlled garage (no lower than 45-50 degrees even in the dead of winter).
Mike