Fogging 350 MAG With Cool Fuel Water Seperator

[tbirdvet]

I guess you could if you keep an eye on it so no spillage. With my luck the tank would move/fall and that would not be good. I use an outboard 3 gal tank with a hose fitting that connects to the hose I removed from the boat tank so no chance of leakage. However, I might try that new Starbrite all in one fuel additive next year and see how that goes. Hooking up remote tanks and fogging is a pain.

 

[Bt Doctur]

It`s not so much fogging the engine as it is getting the fogging mix thru the injectors.
There the ones needing protection.Simply fogging a motor thru the intake has no effect on the injectors.

 

[paulswagelock]

I used the starbrite all in one fogger, stabilizer, chopper and dicer potion. Used it for 2 years. Boat started immediately in the spring and ran great. Pennsylvania winters get rough, so it saw zero degrees during storage. 2007 350 mag engine.

 

[tbirdvet]

I think i might try using the all in one next season. Sure would be easier!

 

[scurrah]

sfergson727, do you think the bulb hand pump is important to your setup? Also, do you have any anti siphon in your system? It didn't look like you had one in your pictures, but maybe it was part of the tank itself. I'm trying to picture the actual process you use to connect this. I'm assuming you don't want much air in your tank lines so the cool fuel pump isn't sucking air for too long before it gets to the fuel in the external tank.

 

[derek4343]

where did you get those fittings and what are the sizes? and do you hook them up to the fuel module?

Here are the photos of the remote tank(s) that I have set up. I got the fitted fuel line from my local sea ray dealer, but they are probably readily available anywhere that deals with fuel lines/connectors.

Connectors to right size the black line with the quicksilver stock fuel line.

Close up of fittings. The plug is installed, and once removed can be used to plug the fuel line on the boat. The plug is actually made with a reducer and then a plug in the reducer.

What can starbrite polish with PTFE do for you??