electric problem

[ejp]

260 Dancer 07, was working fine. Shut down in water,deep water. On startup, only rpm gauge worked. No speed on left side of dash, nothing in center gauges, all dead, and right info gauge where rpm is, no info-blank. Suspect blown fuse. Any sugestion as to which one? Engine runs good, just no fuel readings, psi, eng temp, trim settings and the rest above.

 

[K-9]

disconnect batt turn off all brakers ac/dc-reconnect batt. reset brakers start motor and see if system resets.
check harness from gauges to er check braker panal connections?

keep us informed what is wrong:thumbsup:

 

[Lazy Daze]

I'm still not entirely positive exactly what this certain breaker controls, but it does control quite a bit of power to the dash. It is typically back near the batteries. If it's tripped, the little black arm will have swung out.

Something like this:

http://bluesea.com/category/3/10/productline/overview/150

 

[Asureyez]

That breaker is typically used for protection on heavy DC draw.