Depth on 340 2004 not working

caraca27

New Member
Dec 31, 2007
1
Miami
Boat Info
Sea Ray 185 sport & Sea Ray Sundancer 340
Engines
3.0 and 8.1 dual
Hi, i need some help to figure out , why the depth on my smarcraft dash is not working ,it shows __ on both smartcraft readings ( port side and
starboard side) any ideas, it was working fine , thanks,
by the way , is a sundancer 340 ,2004 model.
it has the regular smarcraft readings , for each side and one on the middle for fuel,rpm,etc.
 
I'm guessing that there's a loose connection. The sensor should be in a plastic thru-hull fitting in the bilge. You could trace the wiring from there to its harness, and from under the helm as well. It couldn't hurt to tap on the the thing in the bilge. Mine is on the stbd side, under the V-drives. The paddle wheel is on the port side. Turn the systems on, have someone watch the gauge, and jiggle the wires.

Something else to check is that it is still "Activated" on the Smart Craft Menu. On mine, it's on the center gauge. Press and hold the two buttons at the same time to enter the menu. Scroll through until you see "Sensors" or something like that. Toggle the Depth Sounder (or similar) to "On." It's possible that it somehow got turned off. I think I would check this before crawling around the bilge.
 

Forum statistics

Threads
112,950
Messages
1,422,861
Members
60,932
Latest member
juliediane
Back
Top