Dash Panels for 1995 300DA

Cocktail Time

Cocktail Time

Well-Known Member
Jul 9, 2007
1,208
Lake Lanier, GA
Boat Info
1998 400 Sundancer, Garmin 840xs GPS, Furuno Radar, B&G GPS pilot etc.
Engines
Cat 3116's, Westerbeke 7.6 BTD
I know a lot of others have done this upgrade but wanted to post pictures from this model. I also had a matching remote panel made for a Clarion remote.

Kudos to Scott Cambra for making the panels www.vectorled.com

Dan

NewDash4.jpg


NewRemotepanel4.jpg
 
Last edited:
deleted
 
Last edited:
Thanks, the install was pretty straight forward but I made sure that I attached each wire in it's original position as I removed each gauge. That way I didn't have anything to forget while the old panel was off and being used as a template. Re-assembly was easy, just time consuming. While the gauges were removed I took the advice on this forum and cycled the cylinder selector on each tach to clean up the contacts. So far no more jumpy tachs either. By the way, if you are looking to change out bulbs in any of the gauges,I found out they take a type 194, which can be had at any auto parts store cheap. I didn't go the led route, but there looks like room for a four bulb type 194 if you wanted to change colors.
 
I have a 96 30' Sundancer and just changed the panel. I had it made out of aluminum, then had it powder coated. When I reconnected the guages, 3 of the 11 are not working. 1-gas guage, 1 voltmeter and 1 oil pressure. I am sure I reconnected properly. After seeing that they were not working, I took apart and sprayed with wd40 and retightened. Still no good.Any ideas? BTW, the dash on your looks very nice. :smt001
 
CT,

Did you get new gauges or just the panel? I want to upgrade the panel and the gauges on my '89 340 but I am having trouble finding gauges.

I really want tachs that have the hour meters in them. That would give me 2 more 2" spots. I want to take the sync gauge from the far left side of the panel and move it between the tachs where it belongs. I then will have space to put a new 2" diameter depth gauge in the panel and get rid of the piece of crap on the top of the panel that came with the boat.

Yours looks great.
 
nor cal
I put all new gauges in and I just painted the panel black for now. I want to make a new one out of wood but I havnt figured out what I want to do with my dash yet. I bought mine from overtons and put a depth finder where the clock was. They are white with chrome bezels.

cocktail time those look really nice
 
Last edited:
I am interested in replacing some panels on my 450DA can you send me that ebay link tried emailing scott at vectorled but not getting a response he must be busy. Looking for someone else know anyone?
 
The company that makes the helm panels for SeaRay is TECNOGRAFIC they are in Ft.Lauderdale. They have made 3 panels for me off of templates and did a super job. Contact Dan 954-928-1714
 
You must log in or register to reply here.

Forum statistics

Threads
113,253
Messages
1,429,311
Members
61,128
Latest member
greenworld
Back
Top