efb3
New Member
Need to find raw water impeller model for 1986 340 Sedan Bridge with Cusader 454. Would like to have two on hand before removing old ones.
Crusader 454 impeller
- Thread starter efb3
- Start date
-
- Tags
- crusader 454 impeller
Just did this. Pull the old one out and read the number on the rubber impeller next to the shaft. Its one of the most popular marine engines in the free world so finding a replacement is easy. Just take the old impeller in wih you.
another trick is to save the best one of the two when you replace them, cover them with patroluem jelly and put it back in the new packaging you just bought. Makes for easy storage of a spare. Also, if you dont have one, buy a hose pick and learn how its used. Will save you alot of effort and bruised knuckles trying to deal with the hoses.
another trick is to save the best one of the two when you replace them, cover them with patroluem jelly and put it back in the new packaging you just bought. Makes for easy storage of a spare. Also, if you dont have one, buy a hose pick and learn how its used. Will save you alot of effort and bruised knuckles trying to deal with the hoses.
moparlvr4406
Active Member
- Jun 29, 2011
- 4,462
- Boat Info
- 1985 340DA
1966 SRV180
(2)1960 Sea Ray 600
(2) 1963 808 Cruise-a-bouts
- Engines
- twin 350hp Crusaders 4.0 Onan /
Merc 950 SS
Merc 650
Merc 1100
twin Johnson 40
probably a Sherwood E35 raw water pump
Sierra marine at most NAPA stores
Sierra marine at most NAPA stores
Bob & Sue
Active Member
Please never use any petroleum products on an impellor it will destroy it within hours of installing it & usually destroys the housing after the veins burn into the housing (ask me how I know). Use dish soap to install the new one.
