Cracked Faux Porthole Window

480ces

Member
Jul 14, 2011
417
Ontario
Boat Info
390 Motor Yacht
Engines
Cummins - 480CEs
Hi Guys,

Has anyone ran into this before? The window is cracked in two places, allowing water into the rear bilge. It appears to just be black plastic.

This "Window" is merely to maintain symmetry and not a real operating window. It's on the Starboard Aft of the boat and will require the removal of the Upper Vanity to get to. There is an access panel, but its too low to allow for removal.

It looks like Sea Ray goofed on the material, it seems brittle from UV. I assume others have had this issue, as this boat hasn't seen the weather many have.

http://imgur.com/YdSybEu

Any ideas for an easy repair?
 
Most windows are made by Bomar / Pomanette Unfortunately it needs replacement the window is "caulked in" so you need a special release agent sold at most marine stores to break the seal the new windows are around $225.
 
Last edited:

Forum statistics

Threads
113,182
Messages
1,428,063
Members
61,088
Latest member
SGT LAT
Back
Top