cover hull vent

[johnj]

hello
i just bought a 330 sundancer 97 model. its missing starboard side hull blower vent covers. they are all the same 95-97 models. i havent had much luck sourcing them anywhere its no longer available from sea ray. Any idea if an after market mfg is currently making these
thanks

 

[JerryS]

Welcome to the board John!
You might try E-Bay. Here is a link: http://shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=Sea+ray+vent&_sacat=See-All-Categories
Good Luck.

 

[tdschafer]

John,
Good Freakin Luck!!!! I searched for over a year to no avail. I asked to borrow one or rent one from members on this site and all I heard were crickets chirping!
See my thread:
http://clubsearay.com/forum/showthread.php?t=24296

Finally a good soul offered me his , without me asking, and I had my fiberglass guy make one. Actually, I gave him my good one too and he made a backup from that.

With that being said, there is a member Tony Clark who I believe is in the UK. He had some made and can get you one (although I recommend you get a spare pair). If that doesn't work for you I can get you one made by my fiberglass guy as he now has the molds to do so! I believe the costs are comparable.

Tony's info:

http://clubsearay.com/forum/showthread.php?t=12648&highlight=vent+cover&page=46

Post #453


PM me if you require further assistance.
Good Luck and welcome to CSR!!

 

[David Paul]

Try this guy. He is a vendor sponsor on CSR. http://www.boatventguy.com/

 

[tdschafer]

Try this guy. He is a vendor sponsor on CSR. http://www.boatventguy.com/

I checked with him and NG. He also needed the original to make a mold. He is a very nice guy and was willing to try and make a port side using the stbd side as a guide. He has a movie set artist who he was confident could make a close replica.
I was concerned that with the compound radii and the tapered shape that it was going to require frequent shipping back & forth for fitting & adjusting.:smt100 That is why I was happy to get the original to make a mold from.

I would contact Tony Clark and buy a set. I referred someone else to him and I believe they were happy!