Last season I ruined the plastic cockpit sink by leaving a rag with acetone on it lay in it. So I replaced it with a stainless steel sink from Amazon. The sink drop right in after opening up the hole with a jig saw roughly a 1/4". One thing I didn't mention when I first posted doing this job was how I restricted the hand held spray facet pressure from blowing water all over the place when you turned it on. I did this by making a restrictor washer. I replaced the rubber gasket where the hose attaches to the spray nozzle with a rubber gasket with a small hole in it to restrict flow. Now I can run water without blowing it all over the sink.