CO Detector

Discussion in 'Sport Cruisers' started by Bodkin Creek George, May 15, 2018.

  1. Bodkin Creek George

    Bodkin Creek George Member SILVER Sponsor

    549
    Sep 11, 2008
    Bodkin Creek, Chesapeake Bay Md.
    2004 340 SDA
    8.1 V-Drives
    How to remove the CO Detector on my 2004 SDA. Is it hard wired and does it have a shutdown relay. I will replace it with a Fire Boy battery powered one.
     
  2. Little Ducky

    Little Ducky Active Member

    676
    Jun 5, 2017
    Chattanooga TN/Dickson TN
    1998 SeaRay 290 Sundancer
    Twin EFI 5.0L w/Alpha 1 drives
    The cover comes off and then it's screwed to the wall.

    I replaced my old wired one with a new wired one.

    I added a switch cover plate to make it look good.

    [​IMG]
    [​IMG]
     
  3. Bodkin Creek George

    Bodkin Creek George Member SILVER Sponsor

    549
    Sep 11, 2008
    Bodkin Creek, Chesapeake Bay Md.
    2004 340 SDA
    8.1 V-Drives
     
  4. Bodkin Creek George

    Bodkin Creek George Member SILVER Sponsor

    549
    Sep 11, 2008
    Bodkin Creek, Chesapeake Bay Md.
    2004 340 SDA
    8.1 V-Drives
    Thanks. How did you get the old one off.
     
  5. Little Ducky

    Little Ducky Active Member

    676
    Jun 5, 2017
    Chattanooga TN/Dickson TN
    1998 SeaRay 290 Sundancer
    Twin EFI 5.0L w/Alpha 1 drives
    This was the old one...... the cover just snaps off to expose the circuit board and screws holding it to the wall...... but be very careful when you disconnect the wires that they don't shoot back into the wall. Don't ask me how I know.
    [​IMG]
     
  6. Bodkin Creek George

    Bodkin Creek George Member SILVER Sponsor

    549
    Sep 11, 2008
    Bodkin Creek, Chesapeake Bay Md.
    2004 340 SDA
    8.1 V-Drives
    Thanks for the help
     

Share This Page

Show Sidebar